MODERN
WELDING COMPANY OF FLORIDA, INC.
1801 Atlanta Ave. - P.O. Box 568678
Orlando, Florida 32856-8678
Ph: 407/843-1270 FAX: 407/423-8187 FL Watts #: 800-641-6789
Subsidiary Survey No. 6
Email: modern6@modweldco.com
Directions: Link
to Mapquest
A) ADMINISTRATIVE PERSONNEL
Larry "Eddie" Pedigo: Vice President
and Plant Manager
Lee Alexander: Tank Department Manager
Greg Caton: Special Fabrications Manager
B) PRINCIPAL PRODUCTS AND CONSTRUCTION STANDARDS
Manufacturers of underground, aboveground, ASME pressure vessels
and many other steel fabricated products serving the petroleum,
chemical, agricultural, and other US industries across the nation.
Atmospheric storage tank construction standards include: Underwriter’s
Laboratories UL-58, UL-1746 and UL-142. Oil water separators are
built to Underwriters Laboratories construction standard, UL-2215.
Fire rated aboveground storage tanks are built to Underwriter’s
Laboratories, UL-2085 and Southwest Research Institute fire testing
criteria. Modern’s fuel dispensing systems utilize Underwriter’s
Laboratories, UL-2244 construction standards.
Pressure vessels can be built to ASME, Section VIII Division 1, “U” stamped
certification. Modern also has “R” stamp certification
to perform repairs and alterations to boilers and pressure vessels
as issued the National Board of Boiler and Pressure Vessel Inspectors.
Product names
include:
• Glasteel™,Glasteel II™, STIP3™, ACT-100, ACT-100-U,
underground storage tanks.
• Modern’s aboveground “IOC”, Integrated
Overflow Compartment tanks provide specialized overfill protection.
• STI’s, F-921® are double wall aboveground storage
tanks.
• SuperVault™ Fireguard™ and Flameshield, are aboveground
fire rated storage tanks.
• Kleerwater™ is Modern’s underground and aboveground
gravity displacement oil water separator line.
• Modern’s AST-10, AST-20 and AST-40 are our complete
aboveground fuel dispensing systems designed to meet a variety
of fuel handling requirements.
• Pourster™, Modern’s Circular Refuse Containers,
for public and municipal waste management handling and control.
Other recognized tank
construction standards include in Modern’s product line is
the American Petroleum Institute’s, API-620, API-650-J and
API-650. Tanks can also be built to the American Water Works, AWWA,
M-42 and D100 standards.
Storage tanks and vessels can be prepared with special linings
or coatings as specified. These special coatings can be for jet
fuel or potable water. Other special linings can be rubber or baked
phenolic linings for special chemical handling applications.
Other steel fabricated products include: Flotation pontoons for
dredging operations, large diameter welded pipe, duct work, bins,
hoppers, hydro-pneumatic tanks, potable water tanks and underground
mining support arches.
Steel Service Center supplying carbon steel structural shapes for
all construction needs is available. Stock includes flat bar, angle,
beams, grating, pipe, sheet steel and plates. Custom shearing, braking,
burning and sawing is available. Steel plates, sheets, angles and
flats can also be rolled and formed to your specifications.
C) AVERAGE
PRODUCTION PER YEAR
Excess of 6,000 tons
D) APPROXIMATE
PRODUCTION AREA
Inside building: 56,000
sq. ft.
Outside building: 100,000 sq. ft.
E) MAXIMUM LIFTING
AND SHIPPING CAPACITY
100,000 lbs.
F) APPROXIMATE
RAIL OR TRUCK CLEARANCE OUT OF CITY
Rail: Height 16 ft, Width 13 ft, Length 80 ft.
Truck: Height 14 ft, Width 12 ft, Length 75 ft.
G) PLATE ROLL
CAPACITY (FOR CARBON STEEL)
Width: 16 ft.
Thickness: 3/4" x 16' width
(Note: Maximum fabrication thickness is 1 1/2 in.)
H) SHIPPING FACILITIES
Railroad: CSX with switch
through building.
Water: Ocean cargo and
inter-coastal waterways through Florida ports.
Truck: Company owned fleet
and numerous common carriers.
I) ORGANIZATIONAL
BREAKDOWN (AVERAGES)
Engineering personnel:
3
Shop personnel: 40
Welders: 15
Qualified ASME code welders: 12
J) TYPES OF MATERIAL
WELDED
Carbon Steel
Stainless Steel
K) ASME AND NATIONAL
BOARD INSPECTION AGENCY
Hartford Steam Boiler
Inspection & Insurance Co.
L) X-RAY FACILITIES
Local
testing Laboratories
M) STRESS RELIEVING
FACILITIES
Outside Sources
N) BLAST CLEANING
AND COATING FACILITIES
YES
0) GENERAL FACILITIES
Shearing: Straight - 1/2 in. x 12 ft. and Rotary - 3/8 in. x 12
ft. dia.
Bending and Forming: 600 Ton 16 ft press brake & Angle bending
rolls 4 x 4 in x 5/8 in max
Welding Equipment: Submerged
arc SAW, Manual SMAW, GMAW, FCAW, TIG
P) COMPLETE STEEL
SERVICE CENTER
Plate Beams Channels
Sheets Tubing Flat Bar
Angle Pipe Expanded Metal
Q) POURSTER TRASH
CONTAINERS
Circular Refuse Containers
|
