Separation by Design
Aboveground Oil Water Separation
Manufactured by: Modern
Welding Company using Kleerwater™ Technology
Benefits of Aboveground
Separation System
• No Elevation
Concerns when Discharging
• Insurance Discount may Apply (Contact your insurance agent)
• No Cathodic Protection Needed
• Save Money on Standardized Unit.
• No Flush Out in Heavy Rains
• Unit is Portable
• No Confined Space Entry
• Shut Down Alarms
• Retains Resale Value
System Performance
• Separation
By Design™ provides the ideal solution for managing liquid
accumulations in petroleum containment areas.
• Initiates operation automatically when water is detected
in containment area and shuts down when water is removed.
• Easy installation inside or outside containment area.
• Patented Kleerwater coalescer efficiently separates oils
and grease from water.
• In actual operation, unit takes oil and grease waste water
concentrations from 44 ppm to <5 ppm, and 3,200 ppm of heavily
mixed influent to 8.3 ppm. In a simulated spill test, separator
is filled with oil to 10% beyond normal shutoff limit with an
effluent not exceeding 5.31 ppm. In a test for total suspended
solids, using State of Wisconsin test protocols, Separation By
Design™ removes over 95% of 106 micron suspended solids
at 25 GPM. Test results available.
• Heating element keeps pump and separation tank from freezing
in cold climates.
• Unit comes equipped with high oil sensor to activate visual
alarm and will shut down system to prevent oil overfill or discharge
to ground water.
• The explosion proof diaphragm pump is designed to minimize
agitation of oil and water and provide the required flow rate
to accommodate operation parameters.
• Tanks are UL-142 listed and come with 1 year limited warranty.
Used at:
• Bulk Oil Terminals
• Material Handling Facilities
• Refineries
• Loading Docks
• Utilities
• Petro Chemical Plants
• Military Installations
• Tank Farms
SeparationbyDesign™
is Patent Pending
www.separationbydesign.com
Spec Data:
Separation
by Design (doc)
Install / Startup
/ Maintenance: Separation
by Design (pdf)
Brochure: Separation
by Design
Manufactured
by:
Modern Welding Company, Inc.
using Kleerwater Technology
Subsidiaries Nationwide
Modern
Welding Company of Owensboro, Inc.
1450 East Parrish Ave
Owensboro, KY 42303
Phone:
270-683-5323
Toll-Free: 800-633-0571
Fax: 270-684-5245
Website: www.modweldco.com
Email: Modern
|
